format/reflow
The source only rewraps a paragraph. Nothing to translate; the target's words must not change.
What changed
This is what the diff version was told. The nodiff baseline got the current page of each language instead.
English changed
@@ -1,5 +1,3 @@ # News -The club has bought two new eights, which arrive -in April. They will be named after our founders -and christened at the spring party. +The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party.
Runs
hunks
✓ Run 1 · 1 edit · 2 turns · 4,276 in / 380 out tokens · $0.0100 · 4.7 s
Checks
- ✓
same words as before
Swedish, before → after
@@ -1,5 +1,3 @@ # Nyheter -Klubben har köpt två nya åttor, som kommer -i april. De ska döpas efter våra grundare -vid vårfesten. +Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten.
The translator's notes
The English change only joins the hard-wrapped lines of one paragraph into a single line. The wording is the same, so this is a formatting change and no facts changed. The Swedish paragraph is also hard-wrapped over three lines: "Klubben har köpt två nya åttor, som kommer / i april. De ska döpas efter våra grundare / vid vårfesten." If the editor had made the same reflow in Swedish, they would have joined these lines too. Joining them keeps the two versions consistent in structure and doesn't alter the content, so I'll make that edit.I joined the three hard-wrapped lines of the Swedish paragraph into one line, to match the English change. The wording is unchanged, because the English edit was only a line-wrapping change with no new facts.
Tool calls
edit_file: {"old_string":"som kommer\ni april. De ska döpas efter våra grundare\nvid vårfesten.","new_string":"som kommer i april. De ska döpas efter våra grundare vid vår
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions. The languages are equal peers; none is the original. Since Swedish was last brought up to date, someone changed English (en). For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync: # News The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Changes made to en since then: @@ -1,5 +1,3 @@ # News -The club has bought two new eights, which arrive -in April. They will be named after our founders -and christened at the spring party. +The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Update the sv file.
✓ Run 2 · 0 edits · 1 turn · 1,940 in / 130 out tokens · $0.0061 · 2.6 s
Checks
- ✓
same words as before
Swedish, before → after
Left unchanged, which is the right answer here.
The translator's notes
The English change only joins three hard-wrapped lines into one line. The wording is the same. It is a formatting change, probably made to unwrap the paragraph. The Swedish file has the same paragraph, wrapped over three lines. Swedish has no reason to follow the English line breaks. Reflowing it would change nothing a reader sees, so I'm leaving Swedish as it is and making no edit.
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions. The languages are equal peers; none is the original. Since Swedish was last brought up to date, someone changed English (en). For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync: # News The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Changes made to en since then: @@ -1,5 +1,3 @@ # News -The club has bought two new eights, which arrive -in April. They will be named after our founders -and christened at the spring party. +The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Update the sv file.
✓ Run 3 · 1 edit · 2 turns · 4,231 in / 345 out tokens · $0.0096 · 5.4 s
Checks
- ✓
same words as before
Swedish, before → after
@@ -1,5 +1,3 @@ # Nyheter -Klubben har köpt två nya åttor, som kommer -i april. De ska döpas efter våra grundare -vid vårfesten. +Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten.
The translator's notes
The English change only joins hard-wrapped lines into a single line. The wording and facts are the same, so it is a formatting change. Swedish has the same paragraph, still wrapped over three lines, and its content already matches English. Swedish may keep its own line breaks, but the same unwrapping applies cleanly, so I'll unwrap it too.I joined the Swedish paragraph's three wrapped lines into one line, matching the English change. The English edit was only a line-wrapping change with no new facts, and the Swedish text already said the same thing, so its wording is unchanged.
Tool calls
edit_file: {"old_string":"Klubben har köpt två nya åttor, som kommer\ni april. De ska döpas efter våra grundare\nvid vårfesten.","new_string":"Klubben har köpt två nya ått
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions. The languages are equal peers; none is the original. Since Swedish was last brought up to date, someone changed English (en). For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync: # News The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Changes made to en since then: @@ -1,5 +1,3 @@ # News -The club has bought two new eights, which arrive -in April. They will be named after our founders -and christened at the spring party. +The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Update the sv file.
diff
✓ Run 1 · 1 edit · 2 turns · 4,224 in / 356 out tokens · $0.0097 · 5.2 s
Checks
- ✓
same words as before
Swedish, before → after
@@ -1,5 +1,3 @@ # Nyheter -Klubben har köpt två nya åttor, som kommer -i april. De ska döpas efter våra grundare -vid vårfesten. +Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten.
The translator's notes
The English change only joins three hard-wrapped lines into one line. The text itself is the same, so this is a formatting change. The Swedish file has the same paragraph, wrapped across three lines: "Klubben har köpt två nya åttor, som kommer / i april. De ska döpas efter våra grundare / vid vårfesten." If the editor had been working on the Swedish version, they would have unwrapped it in the same way. I'll join the Swedish lines into one and leave the wording unchanged.I joined the three wrapped lines of the Swedish paragraph into one line. The English change only removed the hard line breaks and left the content as it was, so I changed nothing in the Swedish wording.
Tool calls
edit_file: {"old_string":"som kommer\ni april. De ska döpas efter våra grundare\nvid vårfesten.","new_string":"som kommer i april. De ska döpas efter våra grundare vid vår
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions. The languages are equal peers; none is the original. Since Swedish was last brought up to date, someone changed English (en). For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced: @@ -1,5 +1,3 @@ # News -The club has bought two new eights, which arrive -in April. They will be named after our founders -and christened at the spring party. +The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Update the sv file.
✓ Run 2 · 1 edit · 2 turns · 4,185 in / 295 out tokens · $0.0090 · 4.0 s
Checks
- ✓
same words as before
Swedish, before → after
@@ -1,5 +1,3 @@ # Nyheter -Klubben har köpt två nya åttor, som kommer -i april. De ska döpas efter våra grundare -vid vårfesten. +Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten.
The translator's notes
The English change only joins three hard-wrapped lines into a single line. The wording is the same, so the content didn't change. In Swedish, the same paragraph is wrapped over three lines. A person making this edit in the Swedish version would likely join those lines too, since the change is about line wrapping. The blank lines after the paragraph aren't part of the change, so I'm leaving them as they are.I joined the three wrapped lines of the Swedish paragraph into one line, to match the English change. The wording is unchanged.
Tool calls
edit_file: {"old_string":"som kommer\ni april. De ska döpas efter våra grundare\nvid vårfesten.","new_string":"som kommer i april. De ska döpas efter våra grundare vid vår
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions. The languages are equal peers; none is the original. Since Swedish was last brought up to date, someone changed English (en). For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced: @@ -1,5 +1,3 @@ # News -The club has bought two new eights, which arrive -in April. They will be named after our founders -and christened at the spring party. +The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Update the sv file.
✓ Run 3 · 1 edit · 2 turns · 4,217 in / 351 out tokens · $0.0096 · 4.2 s
Checks
- ✓
same words as before
Swedish, before → after
@@ -1,5 +1,3 @@ # Nyheter -Klubben har köpt två nya åttor, som kommer -i april. De ska döpas efter våra grundare -vid vårfesten. +Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten.
The translator's notes
The English change only joins three hard-wrapped lines into one line. The wording is the same, so it is a formatting change. Swedish has the same paragraph, also hard-wrapped over three lines. The author of the change evidently wanted unwrapped paragraphs, so I'll apply that to the Swedish paragraph. The text stays the same. I'll leave the trailing blank lines as they are.I joined the three hard-wrapped lines of the Swedish news paragraph into a single line. This matches the English change, which only unwrapped the paragraph. The Swedish text itself is unchanged.
Tool calls
edit_file: {"old_string":"Klubben har köpt två nya åttor, som kommer\ni april. De ska döpas efter våra grundare\nvid vårfesten.","new_string":"Klubben har köpt två nya ått
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions. The languages are equal peers; none is the original. Since Swedish was last brought up to date, someone changed English (en). For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced: @@ -1,5 +1,3 @@ # News -The club has bought two new eights, which arrive -in April. They will be named after our founders -and christened at the spring party. +The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Update the sv file.
nodiff
✓ Run 1 · 0 edits · 1 turn · 1,846 in / 179 out tokens · $0.0064 · 3.6 s
Checks
- ✓
same words as before
Swedish, before → after
Left unchanged, which is the right answer here.
The translator's notes
The two pages say the same thing. - **Purchase:** English has "bought two new eights, which arrive in April". Swedish has "köpt två nya åttor, som kommer i april". - **Naming and christening:** English has "named after our founders and christened at the spring party". Swedish has "döpas efter våra grundare vid vårfesten". "Döpas" covers both naming and christening, so Swedish is a natural rendering, not a gap. Swedish differs only in line breaks and wording, and those differences are deliberate. I made no edits.
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions (English (en)). The languages are equal peers; none is the original. One or more of them may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now. Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that: - A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself. - A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose. - A difference in order or structure is not a reason to reorder Swedish. - Something that only looks like a difference, but says the same thing, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content: # News The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Bring the sv file up to date with the pages above.
✓ Run 2 · 0 edits · 1 turn · 1,846 in / 172 out tokens · $0.0063 · 2.8 s
Checks
- ✓
same words as before
Swedish, before → after
Left unchanged, which is the right answer here.
The translator's notes
The two pages say the same thing, so I made no edits. - **Heading:** "News" matches "Nyheter". - **Purchase:** "two new eights, which arrive in April" matches "två nya åttor, som kommer i april". - **Naming:** "named after our founders and christened at the spring party" matches "döpas efter våra grundare vid vårfesten". The Swedish says the same thing more compactly. The Swedish has line breaks inside the paragraph, but they are markup and not text, so I left them alone.
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions (English (en)). The languages are equal peers; none is the original. One or more of them may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now. Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that: - A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself. - A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose. - A difference in order or structure is not a reason to reorder Swedish. - Something that only looks like a difference, but says the same thing, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content: # News The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Bring the sv file up to date with the pages above.
✓ Run 3 · 0 edits · 1 turn · 1,846 in / 175 out tokens · $0.0064 · 2.6 s
Checks
- ✓
same words as before
Swedish, before → after
Left unchanged, which is the right answer here.
The translator's notes
Comparison of the two pages: - Heading: "News" and "Nyheter" say the same thing. No change needed. - "two new eights, which arrive in April": "två nya åttor, som kommer i april" matches. - "named after our founders and christened at the spring party": "döpas efter våra grundare vid vårfesten" says the same thing. "Named" and "christened" are folded into one verb, which is natural in Swedish. Swedish already says everything the English page says. The wording differs, but the content is the same. I made no edits.
The full prompt
System
You are keeping the Swedish (sv) version of a document up to date with its other language versions (English (en)). The languages are equal peers; none is the original. One or more of them may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now. Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that: - A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself. - A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose. - A difference in order or structure is not a reason to reorder Swedish. - Something that only looks like a difference, but says the same thing, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content: # News The club has bought two new eights, which arrive in April. They will be named after our founders and christened at the spring party. ## Current sv content (this is what you'll edit): # Nyheter Klubben har köpt två nya åttor, som kommer i april. De ska döpas efter våra grundare vid vårfesten. Bring the sv file up to date with the pages above.