← all cases

structure/split-paragraph

The target split one paragraph into two; the change touches both halves.

hunks ✓✓✓ · diff ✓✓✓ · nodiff ✓✓✓ · target Swedish · languages English, Swedish

What changed

This is what the diff version was told. The nodiff baseline got the current page of each language instead.

English changed

@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

Runs

hunks

✓ Run 1 · 2 edits · 2 turns · 4,594 in / 397 out tokens · $0.0108 · 4.4 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en:
1. The start time moved from 10:00 to 11:00. This is probably a correction or a schedule change. The Swedish text says "klockan 10.00 på lördag", so it needs an edit.
2. "coffee is sold" became "coffee and buns are sold". The Swedish text says "där det säljs kaffe", so it needs an edit.

The pier sentence is unchanged, so I'm leaving it alone.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00", and the bridge sentence now reads "där det säljs kaffe och bullar". I left the pier sentence alone because it didn't change.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"där det säljs kaffe.","new_string":"där det säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
# Regatta

The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.


## Changes made to en since then:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 2 · 2 edits · 2 turns · 4,595 in / 391 out tokens · $0.0108 · 4.1 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en:
1. The start time moved from 10:00 to 11:00. This was probably a correction or a schedule change. The Swedish text says "klockan 10.00 på lördag", so it needs an edit.
2. "coffee" became "coffee and buns". This is a new fact. The Swedish text says "där det säljs kaffe", so it needs an edit.

The sentence about the north pier is unchanged, so I'm leaving it as it is.I made two edits to the Swedish file to match the English changes. The start time is now "klockan 11.00", and the bridge sentence now reads "där det säljs kaffe och bullar". I left the rest as it was.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
# Regatta

The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.


## Changes made to en since then:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 3 · 2 edits · 2 turns · 4,588 in / 398 out tokens · $0.0108 · 4.3 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en:
1. The start time changed from 10:00 to 11:00, probably a correction or a schedule change. The sv file says "klockan 10.00 på lördag", so it needs an edit.
2. "coffee" became "coffee and buns", a new fact about what is sold. The sv file says "där det säljs kaffe", so it needs an edit.

The pier sentence is unchanged, so I'm leaving it alone.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00" instead of 10.00. The bridge sentence now reads "där det säljs kaffe och bullar". I left the pier sentence alone because it didn't change.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
# Regatta

The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.


## Changes made to en since then:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.

diff

✓ Run 1 · 2 edits · 2 turns · 4,537 in / 422 out tokens · $0.0110 · 4.5 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of just coffee. Both were likely factual updates.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." needs an edit to 11.00.
- "där det säljs kaffe." needs an edit to "kaffe och bullar".
- "Båtarna sjösätts från norra piren." is unchanged.I made two edits in the Swedish file to match the English changes. The start time is now "klockan 11.00" (was 10.00). The bridge sentence now reads "där det säljs kaffe och bullar". The sentence about launching from the north pier was unchanged in English, so I left it as it was.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"det säljs kaffe.","new_string":"det säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 2 · 2 edits · 2 turns · 4,541 in / 425 out tokens · $0.0110 · 5.0 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of only coffee. Both are new facts, probably corrections or updates.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." Needs the new time, 11.00.
- "där det säljs kaffe." Needs "kaffe och bullar".
- "Båtarna sjösätts från norra piren." Unchanged.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00" (was 10.00). The bridge sentence now reads "där det säljs kaffe och bullar" (was just coffee). The sentence about the north pier didn't change, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"det säljs kaffe.","new_string":"det säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 3 · 2 edits · 2 turns · 4,522 in / 403 out tokens · $0.0062 · 4.4 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of just coffee.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." needs the time changed to 11.00.
- "där det säljs kaffe." needs "kaffe och bullar".
- "Båtarna sjösätts från norra piren." is unchanged.I made two edits to the Swedish file to match the English change. The start time is now 11.00 instead of 10.00. The bridge sentence now says "kaffe och bullar" instead of just "kaffe". The sentence about the north pier was unchanged in English, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.

nodiff

✓ Run 1 · 2 edits · 2 turns · 4,347 in / 426 out tokens · $0.0108 · 5.0 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Differences between the English and Swedish pages:
1. Start time: en says "11:00", sv says "10.00". This is a factual change waiting to be made, so sv becomes "11.00".
2. Refreshments: en says "coffee and buns are sold", sv says only "kaffe". sv is missing the buns, so I'll add "och bullar".
3. Paragraph split: sv puts the spectators sentence in its own paragraph. That is a structural difference only, so I'm leaving it.I made two edits to the Swedish page so it matches the English one. I changed the start time from 10.00 to 11.00. I also added "och bullar" so the page says coffee and buns are sold on the bridge. I kept the Swedish paragraph split as it was, since it only affects layout.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now.

Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that:
- A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself.
- A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose.
- A difference in order or structure is not a reason to reorder Swedish.
- Something that only looks like a difference, but says the same thing, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content:
# Regatta

The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.


## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Bring the sv file up to date with the pages above.
✓ Run 2 · 2 edits · 2 turns · 4,351 in / 431 out tokens · $0.0109 · 5.0 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Differences between the English and Swedish pages:

1. Start time. English says "11:00", Swedish says "klockan 10.00". This is a change waiting to be made, so Swedish gets 11.00.
2. Refreshments. English says "coffee and buns are sold", Swedish says only "kaffe". Swedish is missing the buns, so I'll add "och bullar".
3. Paragraph split. Swedish puts the spectator sentence in its own paragraph. This is a structural difference and doesn't need an edit.I made two edits to the Swedish page so it matches the English one. The start time is now 11.00 instead of 10.00, and the bridge now sells "kaffe och bullar" instead of just coffee. I left the paragraph break before the spectator sentence as it was, since it only affects layout.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"kaffe.","new_string":"kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now.

Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that:
- A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself.
- A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose.
- A difference in order or structure is not a reason to reorder Swedish.
- Something that only looks like a difference, but says the same thing, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content:
# Regatta

The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.


## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Bring the sv file up to date with the pages above.
✓ Run 3 · 2 edits · 2 turns · 4,348 in / 425 out tokens · $0.0065 · 4.9 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Differences between the English and Swedish pages:

1. Start time: en says "11:00", sv says "10.00". This is a factual change, so Swedish needs updating to 11.00.
2. Refreshments: en says "coffee and buns are sold", sv says only "kaffe". Swedish is missing the buns, so I'll add "och bullar".
3. Paragraph split: sv puts the spectator sentence in its own paragraph. This is a structural difference only, so I'll leave it.I made two edits to the Swedish page so it matches the English one. The start time is now 11.00 instead of 10.00, and the bridge now sells "kaffe och bullar" instead of only coffee. I kept the Swedish paragraph split as it was, since it only affects layout.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"det säljs kaffe.","new_string":"det säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now.

Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that:
- A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself.
- A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose.
- A difference in order or structure is not a reason to reorder Swedish.
- Something that only looks like a difference, but says the same thing, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content:
# Regatta

The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.


## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Bring the sv file up to date with the pages above.