structure/split-paragraph
The target split one paragraph into two; the change touches both halves.
What changed
This is what the diff version was told. The nodiff baseline got the current page of each language instead.
English changed
@@ -1,3 +1,3 @@ # Regatta -The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold. +The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.
Runs
hunks
✓ Run 1 · 2 edits · 2 turns · 4,592 in / 412 out tokens · $0.0110 · 4.2 s
Checks
- ✓
has /11[.:]00/ - ✓
lacks "10.00" - ✓
has /bull/i - ✓
has /piren\.\n\nPublik/
Swedish, before → after
@@ -1,5 +1,5 @@ # Regatta -Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. +Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren. -Publik kan titta från bron, där det säljs kaffe. +Publik kan titta från bron, där det säljs kaffe och bullar.
The translator's notes
Changes in en: 1. The start time changed from 10:00 to 11:00, probably a correction or a schedule change. The Swedish text says "klockan 10.00 på lördag", so it needs an edit. 2. "coffee" became "coffee and buns", a new fact about what is sold. The Swedish text says "där det säljs kaffe", so it needs an edit. The pier sentence is unchanged, so I'm leaving it alone.I made two edits to the Swedish file. The start time is now "klockan 11.00" (it was 10.00), and the bridge sentence now reads "där det säljs kaffe och bullar" to match "coffee and buns". The pier sentence didn't change in English, so I left it as it was.
Tool calls
edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync: # Regatta The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold. ## Changes made to en since then: @@ -1,3 +1,3 @@ # Regatta -The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold. +The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold. ## Current sv content (this is what you'll edit): # Regatta Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. Publik kan titta från bron, där det säljs kaffe. Update the sv file.
✓ Run 2 · 2 edits · 2 turns · 4,586 in / 398 out tokens · $0.0108 · 4.4 s
Checks
- ✓
has /11[.:]00/ - ✓
lacks "10.00" - ✓
has /bull/i - ✓
has /piren\.\n\nPublik/
Swedish, before → after
@@ -1,5 +1,5 @@ # Regatta -Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. +Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren. -Publik kan titta från bron, där det säljs kaffe. +Publik kan titta från bron, där det säljs kaffe och bullar.
The translator's notes
Changes in en: 1. The start time moved from 10:00 to 11:00 (a correction or a schedule change). The sv file says "klockan 10.00 på lördag", so it needs an edit. 2. The bridge now sells "coffee and buns" instead of only coffee. The sv file says "där det säljs kaffe", so it needs an edit. The pier sentence is unchanged, so I'm leaving it alone.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00" instead of 10.00. The bridge sentence now reads "där det säljs kaffe och bullar". I left the pier sentence as it was, since it didn't change.
Tool calls
edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync: # Regatta The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold. ## Changes made to en since then: @@ -1,3 +1,3 @@ # Regatta -The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold. +The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold. ## Current sv content (this is what you'll edit): # Regatta Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. Publik kan titta från bron, där det säljs kaffe. Update the sv file.
✓ Run 3 · 2 edits · 2 turns · 4,610 in / 416 out tokens · $0.0064 · 4.4 s
Checks
- ✓
has /11[.:]00/ - ✓
lacks "10.00" - ✓
has /bull/i - ✓
has /piren\.\n\nPublik/
Swedish, before → after
@@ -1,5 +1,5 @@ # Regatta -Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. +Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren. -Publik kan titta från bron, där det säljs kaffe. +Publik kan titta från bron, där det säljs kaffe och bullar.
The translator's notes
Changes in en: 1. The start time changed from 10:00 to 11:00. This is a correction or reschedule. The Swedish text says "klockan 10.00 på lördag", so it needs the new time. 2. "coffee is sold" became "coffee and buns are sold". The Swedish text says "där det säljs kaffe", so it needs "kaffe och bullar". The sentence about the north pier is unchanged. The Swedish paragraph split is a local choice, and I'm keeping it.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00", and the bridge sentence now reads "där det säljs kaffe och bullar". I left the rest alone, including the Swedish paragraph split.
Tool calls
edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then. Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that: - One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself. - A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says. - A change to order or structure applies only where Swedish follows that order or structure. - Something that only looks like the changed content, but is about something else, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync: # Regatta The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold. ## Changes made to en since then: @@ -1,3 +1,3 @@ # Regatta -The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold. +The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold. ## Current sv content (this is what you'll edit): # Regatta Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. Publik kan titta från bron, där det säljs kaffe. Update the sv file.
nodiff
✓ Run 1 · 2 edits · 2 turns · 4,367 in / 439 out tokens · $0.0110 · 4.7 s
Checks
- ✓
has /11[.:]00/ - ✓
lacks "10.00" - ✓
has /bull/i - ✓
has /piren\.\n\nPublik/
Swedish, before → after
@@ -1,5 +1,5 @@ # Regatta -Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. +Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren. -Publik kan titta från bron, där det säljs kaffe. +Publik kan titta från bron, där det säljs kaffe och bullar.
The translator's notes
Differences between the English and Swedish pages: 1. The start time is "11:00" in English and "klockan 10.00" in Swedish. This is a change waiting to be made, because the facts disagree. Swedish should say 11.00. 2. English says "coffee and buns are sold" and Swedish says only "kaffe". Swedish has left out the buns. This is also a change waiting to be made. I'll add "och bullar". 3. The Swedish page splits the text into separate paragraphs. That is a difference in structure only, so I'm keeping it.I made two edits so the Swedish page matches the English one. The start time is now 11.00 instead of 10.00. The coffee sentence now reads "kaffe och bullar", because the English page also mentions buns. I kept the Swedish paragraph split as it was.
Tool calls
edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}edit_file: {"old_string":"det säljs kaffe.","new_string":"det säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now. Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that: - A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself. - A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose. - A difference in order or structure is not a reason to reorder Swedish. - Something that only looks like a difference, but says the same thing, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content: # Regatta The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold. ## Current sv content (this is what you'll edit): # Regatta Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. Publik kan titta från bron, där det säljs kaffe. Bring the sv file up to date with the pages above.
✓ Run 2 · 2 edits · 2 turns · 4,375 in / 447 out tokens · $0.0111 · 4.7 s
Checks
- ✓
has /11[.:]00/ - ✓
lacks "10.00" - ✓
has /bull/i - ✓
has /piren\.\n\nPublik/
Swedish, before → after
@@ -1,5 +1,5 @@ # Regatta -Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. +Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren. -Publik kan titta från bron, där det säljs kaffe. +Publik kan titta från bron, där det säljs kaffe och bullar.
The translator's notes
Differences between the Swedish page and the English page: 1. Start time. English says "11:00 on Saturday" and Swedish says "klockan 10.00 på lördag". This is a factual mismatch, so Swedish needs to change to 11.00. 2. Refreshments. English says "coffee and buns are sold" and Swedish says "där det säljs kaffe", with no buns. Swedish needs "och bullar" added. 3. Paragraph split. Swedish puts the spectator sentence in its own paragraph. This is a difference in structure, so I'm keeping it.I made two edits so the Swedish page matches the English one. I changed the start time from 10.00 to 11.00. I also added "och bullar" to the coffee sentence, since English says coffee and buns are sold. I kept the Swedish paragraph split as it was.
Tool calls
edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now. Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that: - A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself. - A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose. - A difference in order or structure is not a reason to reorder Swedish. - Something that only looks like a difference, but says the same thing, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content: # Regatta The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold. ## Current sv content (this is what you'll edit): # Regatta Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. Publik kan titta från bron, där det säljs kaffe. Bring the sv file up to date with the pages above.
✓ Run 3 · 2 edits · 2 turns · 4,350 in / 420 out tokens · $0.0064 · 4.9 s
Checks
- ✓
has /11[.:]00/ - ✓
lacks "10.00" - ✓
has /bull/i - ✓
has /piren\.\n\nPublik/
Swedish, before → after
@@ -1,5 +1,5 @@ # Regatta -Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. +Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren. -Publik kan titta från bron, där det säljs kaffe. +Publik kan titta från bron, där det säljs kaffe och bullar.
The translator's notes
Differences between the English and Swedish pages: 1. Start time: en says "11:00", sv says "10.00". This is a factual change waiting to be made, so sv becomes "11.00". 2. Refreshments: en says "coffee and buns are sold", sv says only "kaffe". Swedish is missing the buns, so I'll add "och bullar". 3. Paragraph split: sv puts the spectator sentence in its own paragraph. That is a structural difference only, so I'll keep it.I made two edits to the Swedish page so it matches the English one. I changed the start time from 10.00 to 11.00. I also added "och bullar" to the line about what is sold on the bridge. I left the separate paragraph for the spectator sentence as it was.
Tool calls
edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}edit_file: {"old_string":"det säljs kaffe.","new_string":"det säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now. Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things. The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that: - A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself. - A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose. - A difference in order or structure is not a reason to reorder Swedish. - Something that only looks like a difference, but says the same thing, stays as it is. Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style. Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word. Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why. Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content: # Regatta The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold. ## Current sv content (this is what you'll edit): # Regatta Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren. Publik kan titta från bron, där det säljs kaffe. Bring the sv file up to date with the pages above.