← all cases

format/code-block

A command in a code block changes; the target's translated comment in the block stays.

hunks ✓✓✓ · nodiff ✓✓✓ · target Swedish · languages English, Swedish

What changed

This is what the diff version was told. The nodiff baseline got the current page of each language instead.

English changed

@@ -4,5 +4,5 @@ Run this to install the booking app:
 
 ```sh
 # install dependencies
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

Runs

hunks

✓ Run 1 · 1 edit · 2 turns · 4,138 in / 308 out tokens · $0.0090 · 3.8 s

Checks

  • ✓ has "npm install rowbook@3 --save"
  • ✓ lacks "rowbook@2"
  • ✓ keeps "# installera beroenden"
  • ✓ changes only "npm install"…"npm install"

Swedish, before → after

@@ -4,5 +4,5 @@
 
 ```sh
 # installera beroenden
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

The translator's notes

The English change updates the install command from `npm install rowbook@2` to `npm install rowbook@3 --save`. The likely reason is a version bump to 3, plus an explicit `--save` flag.

The Swedish file has one place that concerns this: the code block line `npm install rowbook@2`. It needs the same command change. The command is code, so it isn't translated. The Swedish comment `# installera beroenden` stays as it is, because the comment didn't change.I updated the install command in the Swedish code block to `npm install rowbook@3 --save`, so it matches the English change. I left the Swedish comment `# installera beroenden` alone, since it didn't change.

Tool calls

  1. edit_file: {"old_string":"npm install rowbook@2","new_string":"npm install rowbook@3 --save"}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
## Install

Run this to install the booking app:

```sh
# install dependencies
npm install rowbook@2
```


## Changes made to en since then:
@@ -4,5 +4,5 @@ Run this to install the booking app:
 
 ```sh
 # install dependencies
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

## Current sv content (this is what you'll edit):
## Installera

Kör detta för att installera bokningsappen:

```sh
# installera beroenden
npm install rowbook@2
```


Update the sv file.
✓ Run 2 · 1 edit · 2 turns · 4,158 in / 344 out tokens · $0.0094 · 3.9 s

Checks

  • ✓ has "npm install rowbook@3 --save"
  • ✓ lacks "rowbook@2"
  • ✓ keeps "# installera beroenden"
  • ✓ changes only "npm install"…"npm install"

Swedish, before → after

@@ -4,5 +4,5 @@
 
 ```sh
 # installera beroenden
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

The translator's notes

Change: the install command went from `npm install rowbook@2` to `npm install rowbook@3 --save`. The likely reason is a version bump to 3, plus an explicit `--save` flag.

Places in the Swedish file that this concerns:
- `npm install rowbook@2` in the code block. This needs an edit, because the command is the same code and must match the English.
- The comment `# installera beroenden` is unchanged in English, so it stays.
- The heading and the intro sentence don't mention the version, so they stay.I updated the install command in the Swedish code block to `npm install rowbook@3 --save`, matching the English change. The heading, the intro sentence and the Swedish comment `# installera beroenden` don't mention the version or the flag, so I left them as they were.

Tool calls

  1. edit_file: {"old_string":"npm install rowbook@2","new_string":"npm install rowbook@3 --save"}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
## Install

Run this to install the booking app:

```sh
# install dependencies
npm install rowbook@2
```


## Changes made to en since then:
@@ -4,5 +4,5 @@ Run this to install the booking app:
 
 ```sh
 # install dependencies
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

## Current sv content (this is what you'll edit):
## Installera

Kör detta för att installera bokningsappen:

```sh
# installera beroenden
npm install rowbook@2
```


Update the sv file.
✓ Run 3 · 1 edit · 2 turns · 4,120 in / 304 out tokens · $0.0045 · 3.6 s

Checks

  • ✓ has "npm install rowbook@3 --save"
  • ✓ lacks "rowbook@2"
  • ✓ keeps "# installera beroenden"
  • ✓ changes only "npm install"…"npm install"

Swedish, before → after

@@ -4,5 +4,5 @@
 
 ```sh
 # installera beroenden
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

The translator's notes

Change: the install command went from `npm install rowbook@2` to `npm install rowbook@3 --save`. Most likely the package moved to a new major version, and the `--save` flag was added.

The only place in the Swedish file that this touches is the command line `npm install rowbook@2` in the code block. It needs the same edit. The comment above it, "# installera beroenden", is still correct and stays as it is.I updated the install command in the Swedish file to `npm install rowbook@3 --save`, matching the English change. The Swedish comment above it, "# installera beroenden", was already correct, so I left it alone. Nothing else in the file mentions the version.

Tool calls

  1. edit_file: {"old_string":"npm install rowbook@2","new_string":"npm install rowbook@3 --save"}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
## Install

Run this to install the booking app:

```sh
# install dependencies
npm install rowbook@2
```


## Changes made to en since then:
@@ -4,5 +4,5 @@ Run this to install the booking app:
 
 ```sh
 # install dependencies
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

## Current sv content (this is what you'll edit):
## Installera

Kör detta för att installera bokningsappen:

```sh
# installera beroenden
npm install rowbook@2
```


Update the sv file.

nodiff

✓ Run 1 · 1 edit · 2 turns · 3,996 in / 328 out tokens · $0.0090 · 4.0 s

Checks

  • ✓ has "npm install rowbook@3 --save"
  • ✓ lacks "rowbook@2"
  • ✓ keeps "# installera beroenden"
  • ✓ changes only "npm install"…"npm install"

Swedish, before → after

@@ -4,5 +4,5 @@
 
 ```sh
 # installera beroenden
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

The translator's notes

Differences between the pages:

1. The version differs. English has `rowbook@3 --save`, and Swedish has `rowbook@2`. This is a real change that Swedish hasn't picked up yet, so I'll update it.
2. English has the `--save` flag and Swedish doesn't. This is also a real difference, so I'll add the flag.
3. The comment "install dependencies" is already translated as "installera beroenden", so it needs no edit.I updated the install command in the Swedish page to `npm install rowbook@3 --save`, so it now matches the English page. The Swedish page had `rowbook@2` and no `--save` flag. The heading, intro sentence and code comment already matched the English, so I left them alone.

Tool calls

  1. edit_file: {"old_string":"npm install rowbook@2","new_string":"npm install rowbook@3 --save"}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now.

Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that:
- A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself.
- A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose.
- A difference in order or structure is not a reason to reorder Swedish.
- Something that only looks like a difference, but says the same thing, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content:
## Install

Run this to install the booking app:

```sh
# install dependencies
npm install rowbook@3 --save
```


## Current sv content (this is what you'll edit):
## Installera

Kör detta för att installera bokningsappen:

```sh
# installera beroenden
npm install rowbook@2
```


Bring the sv file up to date with the pages above.
✓ Run 2 · 1 edit · 2 turns · 3,986 in / 306 out tokens · $0.0088 · 3.7 s

Checks

  • ✓ has "npm install rowbook@3 --save"
  • ✓ lacks "rowbook@2"
  • ✓ keeps "# installera beroenden"
  • ✓ changes only "npm install"…"npm install"

Swedish, before → after

@@ -4,5 +4,5 @@
 
 ```sh
 # installera beroenden
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

The translator's notes

Differences between the pages:

1. The English command is `npm install rowbook@3 --save`, and the Swedish one is `npm install rowbook@2`. The version is a fact that has changed, so the Swedish needs updating to `@3`. The English also adds `--save`, and since it is part of the command, the Swedish should match it.
2. The comment is translated ("installera beroenden"), which is fine and stays as it is.I updated the install command in the Swedish page from `npm install rowbook@2` to `npm install rowbook@3 --save`, so it matches the English page. The rest of the page already said the same thing, including the translated comment, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"npm install rowbook@2","new_string":"npm install rowbook@3 --save"}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now.

Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that:
- A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself.
- A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose.
- A difference in order or structure is not a reason to reorder Swedish.
- Something that only looks like a difference, but says the same thing, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content:
## Install

Run this to install the booking app:

```sh
# install dependencies
npm install rowbook@3 --save
```


## Current sv content (this is what you'll edit):
## Installera

Kör detta för att installera bokningsappen:

```sh
# installera beroenden
npm install rowbook@2
```


Bring the sv file up to date with the pages above.
✓ Run 3 · 1 edit · 2 turns · 4,015 in / 351 out tokens · $0.0093 · 4.2 s

Checks

  • ✓ has "npm install rowbook@3 --save"
  • ✓ lacks "rowbook@2"
  • ✓ keeps "# installera beroenden"
  • ✓ changes only "npm install"…"npm install"

Swedish, before → after

@@ -4,5 +4,5 @@
 
 ```sh
 # installera beroenden
-npm install rowbook@2
+npm install rowbook@3 --save
 ```

The translator's notes

Differences between the English and Swedish pages:

1. The English command is `npm install rowbook@3 --save`. The Swedish command is `npm install rowbook@2`. This is a version change (3 instead of 2), so I'll update it in Swedish. The English page also has the `--save` flag, which Swedish lacks. Code is not translated, so Swedish should match the English command.
2. The comment `# install dependencies` is translated as `# installera beroenden`. They say the same thing, so no edit is needed.I changed the install command in the Swedish page from `npm install rowbook@2` to `npm install rowbook@3 --save`, so it matches the English page. That updates the version and adds the `--save` flag. The rest of the Swedish page already says the same as the English one, so I left it as it was.

Tool calls

  1. edit_file: {"old_string":"npm install rowbook@2","new_string":"npm install rowbook@3 --save"}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. The English page may have changed since Swedish was last brought up to date. You have the current page of each other language and the current Swedish page. You have no diff and no earlier version, so you cannot see what changed: only how the pages compare as they are now.

Your job is to bring the Swedish page up to date with the current English page: find what it says that Swedish does not, or says differently, and make the edits a careful editor of the Swedish page would make so that it says the same things.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Many differences between the pages are deliberate, not changes waiting to be made. Keep all of that. It follows that:
- A fact that differs may need several edits in Swedish: everywhere Swedish states it, so that Swedish does not contradict itself.
- A difference may need no edit at all: when Swedish says the same thing in its own words, or leaves something out or adds something on purpose.
- A difference in order or structure is not a reason to reorder Swedish.
- Something that only looks like a difference, but says the same thing, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: every place where the Swedish page no longer says what the other pages say, quoted from both, with whether you think it is a change waiting to be made in Swedish or a difference on purpose, and why.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Current en content:
## Install

Run this to install the booking app:

```sh
# install dependencies
npm install rowbook@3 --save
```


## Current sv content (this is what you'll edit):
## Installera

Kör detta för att installera bokningsappen:

```sh
# installera beroenden
npm install rowbook@2
```


Bring the sv file up to date with the pages above.