← all cases

structure/split-paragraph

The target split one paragraph into two; the change touches both halves.

hunks ✓✓✓ · diff ✓✓✓ · difflook ✓✓✓ · target Swedish · languages English, Swedish

What changed

English changed

@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

Runs

hunks

✓ Run 1 · 2 edits · 2 turns · 4,598 in / 416 out tokens · $0.0110 · 4.2 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en:
1. The start time changed from 10:00 to 11:00. This is a correction or a schedule change. Swedish says "klockan 10.00 på lördag", so it needs an edit to 11.00.
2. "coffee" became "coffee and buns". Swedish says "där det säljs kaffe", so it needs an edit to "kaffe och bullar".

The pier sentence is unchanged. Swedish keeps its own paragraph structure.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00" (it was 10.00). The bridge sentence now reads "där det säljs kaffe och bullar". I left the pier sentence and Swedish's own paragraph layout as they were.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
# Regatta

The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.


## Changes made to en since then:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 2 · 2 edits · 2 turns · 4,580 in / 401 out tokens · $0.0108 · 5.0 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en:
1. The start time changed from 10:00 to 11:00. This is a correction or reschedule. The Swedish file says "klockan 10.00 på lördag", so it needs an edit.
2. "coffee" became "coffee and buns". The Swedish file says "där det säljs kaffe", so it needs an edit.

The pier sentence is unchanged, so it stays as it is.I made two edits to the Swedish file. The start time now reads "klockan 11.00" instead of 10.00. The coffee sentence now reads "där det säljs kaffe och bullar", matching the English "coffee and buns". The pier sentence didn't change in English, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"det säljs kaffe.","new_string":"det säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
# Regatta

The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.


## Changes made to en since then:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 3 · 2 edits · 2 turns · 4,607 in / 424 out tokens · $0.0111 · 5.5 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en:
1. The start time moved from 10:00 to 11:00. This is probably a correction or schedule change. The Swedish sentence "Regattan startar klockan 10.00 på lördag." needs an edit to 11.00.
2. "coffee" became "coffee and buns", a new fact. The Swedish sentence "där det säljs kaffe." needs an edit to "kaffe och bullar".

The sentence about the north pier is unchanged, so it stays as it is.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00" instead of 10.00. The bridge sentence now reads "där det säljs kaffe och bullar". The sentence about the north pier was unchanged in English, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have the content from when Swedish was last synced and a diff showing what changed since then.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## en content at time of last sync:
# Regatta

The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.


## Changes made to en since then:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.

diff

✓ Run 1 · 2 edits · 2 turns · 4,510 in / 390 out tokens · $0.0106 · 4.5 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in the English version:
1. The start time changed from 10:00 to 11:00. Swedish says "klockan 10.00", so it needs updating to 11.00.
2. The bridge now sells "coffee and buns" instead of only coffee. Swedish says "där det säljs kaffe", so it needs "kaffe och bullar".

The sentence about the north pier is unchanged.I made two changes to the Swedish file to match the English update. The start time is now "klockan 11.00" (was 10.00). The bridge sentence now reads "där det säljs kaffe och bullar". The sentence about the north pier was unchanged in English, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 2 · 2 edits · 2 turns · 4,524 in / 399 out tokens · $0.0107 · 4.2 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of just coffee.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." The time needs updating to 11.00.
- "där det säljs kaffe." This needs "kaffe och bullar".
- "Båtarna sjösätts från norra piren." This is unchanged.I made two edits to the Swedish file to match the English change. The start time is now 11.00 instead of 10.00. The bridge sentence now says "kaffe och bullar" instead of just "kaffe". The pier sentence didn't change, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 3 · 2 edits · 2 turns · 4,512 in / 388 out tokens · $0.0061 · 4.1 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of just coffee.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." needs the time changed to 11.00.
- "där det säljs kaffe." needs "kaffe och bullar".
- The north pier sentence is unchanged.I made two edits to the Swedish file to match the English change. The start time is now "klockan 11.00" (was 10.00), and the bridge sentence now reads "där det säljs kaffe och bullar". The north pier sentence didn't change, so I left it alone.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.

difflook

✓ Run 1 · 2 edits · 2 turns · 5,385 in / 399 out tokens · $0.0119 · 4.3 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of just coffee.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." needs the new time, 11.00.
- "där det säljs kaffe." needs "kaffe och bullar".
- "Båtarna sjösätts från norra piren." is unchanged.I made two edits to the Swedish page to match the English change. The start time is now "klockan 11.00", and the bridge sentence now reads "där det säljs kaffe och bullar". The sentence about launching from the north pier was unchanged in English, so I left it as it was.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown. You can look at the current English page with search and read. Use them when what to do in Swedish depends on what that page says outside the diff: above all, whether something a change removed or renamed is still mentioned anywhere on it.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 2 · 2 edits · 2 turns · 5,399 in / 418 out tokens · $0.0121 · 4.6 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of only coffee.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." needs the time changed to 11.00.
- "där det säljs kaffe." needs "kaffe och bullar".

The two sentences sit in separate paragraphs in sv, but that is a local layout choice and I'm keeping it.I made two edits to the Swedish page to match the English change. The start time is now 11.00 instead of 10.00. The bridge sentence now says "kaffe och bullar" (coffee and buns) instead of just "kaffe". I left the Swedish paragraph breaks as they were.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown. You can look at the current English page with search and read. Use them when what to do in Swedish depends on what that page says outside the diff: above all, whether something a change removed or renamed is still mentioned anywhere on it.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.
✓ Run 3 · 2 edits · 2 turns · 5,354 in / 354 out tokens · $0.0058 · 3.8 s

Checks

  • ✓ has /11[.:]00/
  • ✓ lacks "10.00"
  • ✓ has /bull/i
  • ✓ has /piren\.\n\nPublik/

Swedish, before → after

@@ -1,5 +1,5 @@
 # Regatta
 
-Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.
+Regattan startar klockan 11.00 på lördag. Båtarna sjösätts från norra piren.
 
-Publik kan titta från bron, där det säljs kaffe.
+Publik kan titta från bron, där det säljs kaffe och bullar.

The translator's notes

Changes in en: the start time moved from 10:00 to 11:00, and the bridge now sells "coffee and buns" instead of just coffee.

Places in sv:
- "Regattan startar klockan 10.00 på lördag." needs the new time, 11.00.
- "där det säljs kaffe." needs buns added.I made two edits to the Swedish page to match the English change. The start time is now 11.00 instead of 10.00. The sentence about the bridge now says "kaffe och bullar", since English now says coffee and buns are sold there.

Tool calls

  1. edit_file: {"old_string":"klockan 10.00","new_string":"klockan 11.00"}
  2. edit_file: {"old_string":"säljs kaffe.","new_string":"säljs kaffe och bullar."}
The full prompt
System
You are keeping the Swedish (sv) translation of a document up to date. Its source is English (en): Swedish was translated from it, and has since been corrected and localized by hand. Since Swedish was last brought up to date, someone changed the English page. For each language that changed, you have a diff showing what changed since Swedish was last synced: a line starting with a space is unchanged context, "-" was removed, "+" was added. The rest of that file is not shown. You can look at the current English page with search and read. Use them when what to do in Swedish depends on what that page says outside the diff: above all, whether something a change removed or renamed is still mentioned anywhere on it.

Your job is not to translate the diff. It is to understand each change (what it says, and why it was likely made: a new fact, a correction, a rewording, a removal, a reordering) and then ask: if the person who made it had been editing the Swedish version instead, what would they have changed there? Make those changes.

The versions are not copies of each other. They may differ on purpose: wording, order, examples, local services and links, whole sections that only one language has. Keep all of that, except where a change is about it. It follows that:
- One change may need several edits in Swedish: everywhere Swedish says what changed, also where the other language never said it, so that Swedish does not contradict itself.
- A change may need no edit at all: when Swedish does not have the content it is about, or already says what the change says.
- A change to order or structure applies only where Swedish follows that order or structure.
- Something that only looks like the changed content, but is about something else, stays as it is.

Some things the documents cannot settle: two languages say different things about the same fact, or a change could mean two different things for Swedish. Then do not guess. Call ask, once, with the question, the options you see, and what you would do if no one answered, and keep the content in question as it is unless you get an answer. Ask only when the answer changes what you write, never about wording or style.

Markup is not text. Component and attribute names, ids, front matter keys, file paths and URLs stay exactly as they are, except a link whose Swedish pages follow a convention of their own (a language prefix, a translated path): new links in Swedish follow that convention too. Text a reader sees is Swedish, written as a Swedish writer would put it, not word for word.

Before you edit, write out briefly: for each change, what it says and why it was likely made; then every place in the Swedish file that it concerns, quoted, with whether that place needs an edit and why. Places the other language never mentions count too.

Then make the edits, together in one response. Edit with edit_file: its old_string must appear exactly, once, in the Swedish file. Each edit's result shows the Swedish file around it as it now reads. Look at it: if anything there is wrong, was missed, or now contradicts something elsewhere in the Swedish file, fix it with further edits. When the Swedish file is right, say in a sentence or two what you changed and why. If nothing needs to change, make no edit at all, and say why not. Write your plan, your notes and your summary in English, whatever language the documents are in.
User
## Changes made to en since sv last synced:
@@ -1,3 +1,3 @@
 # Regatta
 
-The regatta starts at 10:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee is sold.
+The regatta starts at 11:00 on Saturday. Boats launch from the north pier. Spectators can watch from the bridge, where coffee and buns are sold.

## Current sv content (this is what you'll edit):
# Regatta

Regattan startar klockan 10.00 på lördag. Båtarna sjösätts från norra piren.

Publik kan titta från bron, där det säljs kaffe.


Update the sv file.